Skip to main content
LakeQuality

Harts Lake

Calhoun County, Michigan55 acresView mapDirections

No nutrient or algae sampling on record from EGLE for this lake.

Max depth
40 ft
Bathymetric survey
Area
55 acres
Surface area
Shoreline
1 mi
Measured length
  • Impaired · PFAS
  • 40 ft max depth

Harts Lake in Calhoun County, Michigan has water-quality measurements published by EGLE, shown here as reported. Maximum depth: 40 ft. Surface area: 54.8 acres.

Loading map…

Water clarity at Harts Lake

Clear water. Across summers from 2018 to 2023, Harts Lake averaged 3.3 m (11 ft) of visibility down into the water, so you can typically see several feet down in midsummer. This lake sits close to the line between clarity classes, so treat the label as approximate and the depth reading as the real number.

Nobody has taken a water sample here that we can find. Michigan's environmental agency measures clarity on lakes like this one from satellite images instead, which is why this page reports how clear the water is and no phosphorus or algae readings.

Clear is not the same as clean. A lake can be easy to see through and still carry high nutrient levels, and a naturally tea-stained lake can be perfectly healthy. The nutrient and algae readings on other lakes come from phosphorus and chlorophyll-a measured in a laboratory, and clarity alone cannot stand in for them.

The same satellite images put summer algae here at roughly 4.17 micrograms per litre. Estimating algae from orbit is far less exact than measuring clarity, so that figure is worth knowing and is not part of any rating.

Harts Lake is a 55-acre lake in Calhoun County, Michigan with a maximum depth of 40 feet (14-foot average).

Source: EPA Water Quality Portal sampling records, EGLE. Methodology: how these readings are compared.

What Harts Lake is good for

From access and monitoring records, not editorial picks.

  • Deep water40 ft surveyed max depth

Swimming conditions

No reading

Not rated

Nutrient and algae readings are not a swimming clearance. Harts Lake is listed impaired under Clean Water Act §303(d) (IR 5) for pFAS. Check local advisories before you swim.

Whether Harts Lake is safe to swim in today is a call for the Michigan Department of Environment, Great Lakes, and Energy (EGLE) and the county health department, who post current advisories. LakeQuality does not issue swimming clearances.

Compare swimming lakes near Grand Rapids →

Get alerts for Harts Lake →

Water quality measurements for Harts Lake

These are the measurements EGLE publishes for Harts Lake, shown as reported. The condition class beside each reading is the EPA National Lakes Assessment class for this lake’s ecoregion.

No clarity data. TSI undefined.

Ask about Harts Lake

Answers come straight from the public measurements and survey records on this page.

Lake Details

Max depth

40 ft

Average depth

14 ft

Surface area

55 acres

Shoreline

1 mi

Stays via Stay22

Stays near Harts Lake

Compare lakeside cabins, hotels, and vacation rentals near Harts Lake in Calhoun County, Michigan — live availability and prices for your trip. Switch the map to Satellite to see the lake and how close each stay is to the water.

Top-rated places to stay near Harts Lake

Prices for Oct 16–18, 4 adults. Change dates on the map below.

Availability and prices from Stay22 partners (Booking.com, Vrbo, Expedia). We may earn a commission from bookings, at no extra cost to you.

Planning a whole trip? See where to stay at Michigan’s top lakes →

Follow Harts Lake’s readings

Email me when new measurements post for this lake. Updates stay free.


Or email

Fishing Harts Lake

EPA Impairment Status

Harts Lake is officially listed as impaired under Clean Water Act §303(d) in the 2024 EPA reporting cycle (IR category 5).

Causes of impairment

PFAS

Designated uses not supporting: Fish consumption.

Source: EPA ATTAINS assessment unit MI040500030503-06 · Official waterbody report

Nearby Lakes in Calhoun County

Frequently asked questions about Harts Lake

Where is Harts Lake?

Harts Lake is a lake in Calhoun County, Michigan. Its water-quality measurements are published by EGLE and shown on this page as reported.

What is the water quality of Harts Lake?

Harts Lake in Calhoun County, Michigan has water-quality measurements published by EGLE, shown here as reported. Maximum depth: 40 ft. Surface area: 54.8 acres.

Measurements on this page ↑

Is Harts Lake safe to swim in?

Nutrient and algae readings are not a swimming clearance. Harts Lake is listed impaired under Clean Water Act §303(d) (IR 5) for pFAS. Check local advisories before you swim.

Swimming on this page ↑

How deep is Harts Lake?

Harts Lake has a maximum depth of 40 feet and an average depth of 14 feet. The lake covers 54.8 acres.

Where this data comes from

Measurements for Harts Lake come from the EPA Water Quality Portal. Per-sample source details are not recorded for this lake.

Other records on this page

Impairment status from EPA ATTAINS 303(d) database