Wellington Dam
WA, AustraliaView mapDirections
CSIRO publishes the water-quality measurements for Wellington Dam. Here is what has been measured.
- Limited data
Wellington Dam in WA, Australia has official water-quality measurements, shown as reported. Water clarity: 2.3 m visibility. Chlorophyll-a (algae): 0.5 µg/L.
How Wellington Dam is classified
Wellington Dam in Australia is published with the authority's own measurements and class. The measurements here are published by the agency that samples the lake, as reported. Sampling here has recorded water clarity and algae (chlorophyll-a), but not phosphorus.
LakeQuality publishes no grade of its own beside it. Everything below thathas been measured is reported on this page.
Monitoring: CSIRO (Commonwealth Scientific and Industrial Research Organisation).
Wellington Dam is a lake in WA County, Australia.
Source: CSIRO (Commonwealth Scientific and Industrial Research Organisation) — not the EPA Water Quality Portal, last sampled 2021-08-19. Methodology: how these readings are compared.
Swimming conditions
No readingLimited data
Nutrient and algae readings are not a swimming clearance. Check local advisories before you swim.
Whether Wellington Dam is safe to swim in today is a call for CSIRO (Commonwealth Scientific and Industrial Research Organisation) and the county health department, who post current advisories. LakeQuality does not issue swimming clearances.
Water quality measurements for Wellington Dam
These are the measurements CSIRO publishes for Wellington Dam. More on the source.
Moderate clarity, visible to about 7.5 ft. Chlorophyll-a 0.5 µg/L. TSI 36.
| Measure | Reading | Where it sits |
|---|---|---|
| Water clarity (Secchi depth) | 2.3m | Measured, not scored How deep a black-and-white disk stays visible from the surface. Higher is clearer. |
| Total phosphorus | No reading The nutrient that most limits algae growth in freshwater. More phosphorus, more algae potential. | |
| Chlorophyll-a (algae) | 0.5µg/L | Measured, not scored The green pigment in algae — a direct measure of how much algae is in the water. |
| Trophic state (TSI)Carlson's 0–100 index of how much algae a lake can support, from clarity, phosphorus and chlorophyll-a. | 36 | Oligotrophic OligotrophicMesotrophicEutrophicHypereutrophic |
Low nutrients, clear water. No reading is a swimming clearance.
Ask about Wellington Dam
Answers come straight from the public measurements and survey records on this page.
Stays via Stay22
Stays near Wellington Dam
Compare lakeside cabins, hotels, and vacation rentals near Wellington Dam in WA, Australia — live availability and prices for your trip. Switch the map to Satellite to see the lake and how close each stay is to the water.
Top-rated places to stay near Wellington Dam
Prices for Oct 2–4, 4 adults. Change dates on the map below.
Availability and prices from Stay22 partners (Booking.com, Vrbo, Expedia). We may earn a commission from bookings, at no extra cost to you.
Follow Wellington Dam’s readings
Email me when new measurements post for this lake. Updates stay free.
Or email
Fishing Wellington Dam
Frequently asked questions about Wellington Dam
Where is Wellington Dam?
- Wellington Dam is a lake in WA, Australia. This page reports official water-quality measurements, shown as reported.
What is the water quality of Wellington Dam?
- Wellington Dam in WA, Australia has official water-quality measurements, shown as reported. Water clarity: 2.3 m visibility. Chlorophyll-a (algae): 0.5 µg/L.
Is Wellington Dam safe to swim in?
- Wellington Dam has official nutrient and clarity measurements, not a bacteria swim class and not a safety clearance. Algal blooms, currents, and depth are not covered. Always check local notices before swimming.
Explore Wellington Dam across LakeQuality
More lakes in Australia
Where this data comes from
11 measurements from 3 monitoring stations, 2021. Retrieved from CSIRO inland waters bio-optical sampling (not the EPA Water Quality Portal) on 2026-08-16.
Collected and reported by
- CSIRO
csiro-inland-biooptical11 samples · 2021
Analytical methods
- CSIRO inland waters bio-optical (surface HPLC chlorophyll-a, Secchi)
Monitoring station identifiers (3)
WEL_01WEL_02WEL_03
Authority classifications are shown as the authority published them. See where the data comes from and data sources.