Skip to main content
LakeQuality

Beaver Meadow Reservoir

Summit County, UtahView mapDirections

Utah DWQ publishes the water-quality measurements for Beaver Meadow Reservoir. Here is what has been measured.

Clarity
4.6 ft
Murkier than most
Secchi · sampled 2023
Phosphorus
22 µg/L
Typical for Utah
Measured by Utah DWQ
Chlorophyll-a
4.9 µg/L
Typical for Utah
Measured by Utah DWQ
Max depth
~18 ft est.
GLOBathy model
Type
Eutrophic
Trophic class
  • Eutrophic
  • 18 ft max depth
  • Limited data

Beaver Meadow Reservoir in Summit County, Utah has water-quality measurements published by Utah DWQ, shown here as reported. Water clarity: 4.6 ft visibility. Phosphorus: 22 µg/L. Chlorophyll-a (algae): 4.9 µg/L.

Loading map…

Beaver Meadow Reservoir is a productive, nutrient-rich eutrophic lake in Summit County, Utah with an estimated average depth of about 18 feet. Compared to the 17 other monitored lakes in Summit County, Beaver Meadow Reservoir ranks #5 for water quality.

Source: EPA Water Quality Portal sampling records, Utah DWQ, last sampled 2023-07-12. Methodology: how these readings are compared.

Swimming conditions

Readings only

Limited data

Based on clarity and algae readings from past sampling — there is no live water temperature and a current cyanobacteria reading for this lake. Check your state or county health department before you swim.

Nutrient and algae readings are not a swimming clearance. Check local advisories before you swim.

Whether Beaver Meadow Reservoir is safe to swim in today is a call for the Utah Division of Water Quality and the county health department, who post current advisories. LakeQuality does not issue swimming clearances.

Get alerts for Beaver Meadow Reservoir →

Water quality measurements for Beaver Meadow Reservoir

These are the measurements Utah DWQ publishes for Beaver Meadow Reservoir, shown as reported. The condition class beside each reading is the EPA National Lakes Assessment class for this lake’s ecoregion.

Murky, only visible to about 4.6 ft. Phosphorus 22 µg/L. Chlorophyll-a 4.9 µg/L. TSI 50.

Water quality readings
MeasureReadingWhere it sits
Water clarity (Secchi depth)4.6ftMeasured, not scored

How deep a black-and-white disk stays visible from the surface. Higher is clearer.

Total phosphorus22µg/LGood
GoodFairPoor
Chlorophyll-a (algae)4.9µg/LMeasured, not scored

The green pigment in algae — a direct measure of how much algae is in the water.

Trophic state (TSI)Carlson's 0–100 index of how much algae a lake can support, from clarity, phosphorus and chlorophyll-a.50Eutrophic
OligotrophicMesotrophicEutrophicHypereutrophic

High nutrients, frequent algae, reduced clarity

Ask about Beaver Meadow Reservoir

Answers come straight from the public measurements and survey records on this page.

Lake Details

Max depth

~18 ft est.

Depth marked “est.” is a modeled maximum from GLOBathy (Khazaei et al. 2022, CC0), not a measured survey. Utah has not published bathymetry for Beaver Meadow Reservoir.

Lake Size & Watershed

Watershed (drainage) area

6 sq mi

HydroLAKES / HydroSHEDS

Surface area

86 acres

HydroLAKES / HydroSHEDS

Shoreline

1.6 mi

HydroLAKES / HydroSHEDS

Elevation

9,373 ft

Size, shoreline, and watershed area from HydroLAKES (HydroSHEDS). Mean depth here is modelled, not surveyed — HydroLAKES v1.0 estimates lake depth from surrounding terrain rather than from soundings. Treat it as an approximation, and prefer a state bathymetric survey where one exists.

Stays via Stay22

Stays near Beaver Meadow Reservoir

Compare lakeside cabins, hotels, and vacation rentals near Beaver Meadow Reservoir in Summit County, Utah — live availability and prices for your trip. Switch the map to Satellite to see the lake and how close each stay is to the water.

Top-rated places to stay near Beaver Meadow Reservoir

Prices for Oct 30–Nov 1, 4 adults. Change dates on the map below.

Availability and prices from Stay22 partners (Booking.com, Vrbo, Expedia). We may earn a commission from bookings, at no extra cost to you.

Planning a whole trip? See where to stay at Utah’s top lakes →

Follow Beaver Meadow Reservoir’s readings

Email me when new measurements post for this lake. Updates stay free.


Or email

Fishing Beaver Meadow Reservoir

Reservoir Info (USACE NID)

Beaver Meadow Reservoir is a man-made reservoir impounded by the Beaver Meadow (completed 1949), built primarily for irrigation on the Lost Creek; earth-type dam, 45 ft tall and 935 ft long.

Normal storage
2,155 ac-ft
Max storage
3,094 ac-ft
Drainage area
7.9 sq mi
Hazard class
Significant
Owner
INTERSTATE IRRIGATION & RESERVOIR CO

Source: USACE National Inventory of Dams, NID ID UT00028 · Operator website

Nearby Lakes in Summit County

Frequently asked questions about Beaver Meadow Reservoir

Where is Beaver Meadow Reservoir?

Beaver Meadow Reservoir is a lake in Summit County, Utah. Its water-quality measurements are published by Utah DWQ and shown on this page as reported.

What is the water quality of Beaver Meadow Reservoir?

Beaver Meadow Reservoir in Summit County, Utah has water-quality measurements published by Utah DWQ, shown here as reported. Water clarity: 4.6 ft visibility. Phosphorus: 22 µg/L. Chlorophyll-a (algae): 4.9 µg/L.

Measurements on this page ↑

Is Beaver Meadow Reservoir safe to swim in?

Nutrient and algae readings are not a swimming clearance. Check local advisories before you swim.

Swimming on this page ↑

How deep is Beaver Meadow Reservoir?

No published bathymetric survey covers Beaver Meadow Reservoir, so its depth has not been measured. The HydroLAKES global model estimates an average depth of about 18 feet, but that is a modelled estimate derived from surrounding terrain rather than a measurement on the water, so treat it as approximate.

Where this data comes from

7 measurements from 1 monitoring station, 2023. Retrieved from the EPA Water Quality Portal on 2026-08-02.

Collected and reported by

  • Utah Department Of Environmental QualityUTAHDWQ_WQX7 samples · 2023

Analytical methods

  • Field Measurements
  • Phosphorus by Colorimetry
  • 10200 H ~ Chlorophyll a-b-c Determination
Monitoring station identifiers (1)

EPA condition classes from the National Lakes Assessment (EPA 841-R-24-006, Table 6-3), applied by ecoregion. See where the data comes from and data sources.

Other records on this page

Lake size & watershed from HydroLAKES (HydroSHEDS)