Skip to main content
LakeQuality

Water elevation · USGS gauge 08110300 · updated August 29, 2026

Lake Mexia Water LevelFWater-quality grade F

The USGS gauge at Lake Mexia near Mexia, TX last recorded a water elevation of 446.97 ft on August 29, 2026. In Limestone County, Texas, Lake Mexia carries an overall water-quality grade of F. Water clarity averages 1.1 feet of visibility. The water-quality samples behind that grade were submitted to the EPA Water Quality Portal by Texas Commission on Environmental Quality; the level above comes from the USGS, which runs the gauge.

Water elevation

446.97ft

feet above sea level

USGS reading· Aug 30, 2026, 1:15 AMOpen USGS gauge 08110300

Gauge 08110300, Lake Mexia near Mexia, TX, operated by the U.S. Geological Survey. The value above is the most recent reading on file with its own timestamp. When the gauge answers, it is replaced by the current one — no estimate is ever shown in place of a missing reading.

What this number is

Water elevation is the height of the lake surface above sea level, as surveyed at Lake Mexia near Mexia, TX. It is the number reservoir operators publish, and it is comparable from one reading to the next at this lake. It is not the depth of the water.

Measured as
Water elevation, ft above sea level
Most recent reading on file
446.97 ft · August 29, 2026
Water quality
FGrade F

No target level is shown here. Saying a lake is high or low needs a conservation pool or a seasonal rule curve to measure against, and the gauge reading alone does not carry one. The station page above holds the full record, including the last several days, which is what a single reading has to be read against.

Water quality at Lake Mexia

F

Lake Mexia grades F on total phosphorus, total nitrogen, chlorophyll-a, and turbidity, measured against the EPA National Lakes Assessment condition classes for its own ecoregion. Clarity averages 1.1 feet of visibility — shown, not scored.

The gauge measures how much water is in the lake. The grade measures what is in the water. A rise or a drawdown does not change the letter until the lake is sampled again.

Full water-quality breakdown for Lake Mexia

Common questions

What is the water level at Lake Mexia right now?

The most recent reading from the USGS gauge at Lake Mexia near Mexia, TX is a water elevation of 446.97 ft, taken on August 29, 2026. This page reloads that gauge every time it is opened, so the number above is the current one whenever the station is reporting. USGS lake gauges typically post a new value every 15 to 60 minutes.

What does water elevation mean?

Water elevation is the height of the lake surface above sea level, as surveyed at Lake Mexia near Mexia, TX. It is the number reservoir operators publish, and it is comparable from one reading to the next at this lake. It is not the depth of the water.

Is Lake Mexia low?

That question needs a target pool level to answer, and the gauge reading alone does not supply one. Reservoir operators publish a conservation pool or a seasonal rule curve for the lakes they manage, and the USGS station page for gauge 08110300 carries the full record this reading came from, including the past several days. Comparing today against that record is the honest version of "low" — a single number is not.

Does the water level affect water quality at Lake Mexia?

Lake Mexia carries an overall water-quality grade of F. Lakes are graded A to F on nutrients and algae — total phosphorus, total nitrogen, chlorophyll-a, and turbidity — measured against the EPA National Lakes Assessment 2022 condition classes for that lake's own ecoregion, so a lake is judged against the lakes it would naturally resemble. None of that comes from the gauge. A drawdown can concentrate nutrients and a heavy inflow can dilute them, but neither shows up in the grade until the water is sampled again. Treat the two numbers as separate measurements of the same lake.

Where these numbers come from

The level and temperature are U.S. Geological Survey instantaneous values from gauge 08110300, a public feed with no licence restriction. The water-quality grade is built from EPA Water Quality Portal samples submitted by Texas Commission on Environmental Quality. For advisories and standards in Texas, TCEQ is the authority — a gauge reading is neither.