Skip to main content
LakeQuality

Water elevation · USGS gauge 14308995 · updated August 29, 2026

Water elevation

1826.65ft

feet above sea level

USGS reading· Aug 30, 2026, 1:00 AMOpen USGS gauge 14308995 ↗

Gauge 14308995, Galesville Reservoir near Azalea, OR, operated by the U.S. Geological Survey. The value above is the most recent reading on file with its own timestamp. When the gauge answers, it is replaced by the current one — no estimate is ever shown in place of a missing reading.

What this number is

Water elevation is the height of the lake surface above sea level, as surveyed at Galesville Reservoir near Azalea, OR. It is the number reservoir operators publish, and it is comparable from one reading to the next at this lake. It is not the depth of the water.

Measured as
Water elevation, ft above sea level
Most recent reading on file
1826.65 ft · August 29, 2026

The Corps of Engineers reads Galesville Dam at 1,820.54 ft, 60.96 ft below its Top of Conservation of 1,881.50 ft.

Both numbers come from the U.S. Army Corps of Engineers for its Galesville Dam project, on that project's own vertical datum. That figure is a fixed level rather than a seasonal target, so a reservoir drawn down on purpose in autumn can sit well under it and still be exactly where the Corps intends. Because the datum is the project's own, this elevation is comparable to its own reference and to nothing else — not to a gauge reading from another agency, and not to a lake's mapped surface elevation.

Water quality at Galesville Reservoir

Galesville Reservoir's readings for total phosphorus, total nitrogen, chlorophyll-a, and turbidity are shown beside the EPA National Lakes Assessment condition classes for its own ecoregion.

The gauge measures how much water is in the lake. The nutrient and algae readings measure what is in the water. A rise or a drawdown does not change those readings until the lake is sampled again.

Full water-quality breakdown for Galesville Reservoir

Common questions

What is the water level at Galesville Reservoir right now?

The most recent reading from the USGS gauge at Galesville Reservoir near Azalea, OR is a water elevation of 1826.65 ft, taken on August 29, 2026. This page reloads that gauge every time it is opened, so the number above is the current one whenever the station is reporting. USGS lake gauges typically post a new value every 15 to 60 minutes.

What does water elevation mean?

Water elevation is the height of the lake surface above sea level, as surveyed at Galesville Reservoir near Azalea, OR. It is the number reservoir operators publish, and it is comparable from one reading to the next at this lake. It is not the depth of the water.

Is Galesville Reservoir low?

Galesville Reservoir stood at 1,820.54 ft on September 27, 2026, 60.96 ft below its Top of Conservation of 1,881.50 ft. Both numbers come from the U.S. Army Corps of Engineers for its Galesville Dam project, on that project's own vertical datum. That figure is a fixed level rather than a seasonal target, so a reservoir drawn down on purpose in autumn can sit well under it and still be exactly where the Corps intends. Because the datum is the project's own, this elevation is comparable to its own reference and to nothing else — not to a gauge reading from another agency, and not to a lake's mapped surface elevation.

Does the water level affect water quality at Galesville Reservoir?

Galesville Reservoir has nutrient and algae readings on record from state and federal monitoring. Each lake's nutrient and algae readings — total phosphorus, total nitrogen, chlorophyll-a, and turbidity — are shown beside the EPA National Lakes Assessment 2022 condition class for that lake's own ecoregion, so a reading is compared against the lakes it would naturally resemble. LakeQuality publishes no letter grade. None of that comes from the gauge. A drawdown can concentrate nutrients and a heavy inflow can dilute them, but neither shows up in the readings until the water is sampled again. Treat the two numbers as separate measurements of the same lake.

Where these numbers come from

The level and temperature are U.S. Geological Survey instantaneous values from gauge 14308995, a public feed with no licence restriction. The water-quality readings come from EPA Water Quality Portal samples submitted by Department of Environmental Quality - State of Oregon. For advisories and standards in Oregon, Oregon DEQ is the authority — a gauge reading is neither.